Deleting Bar Codes; Transmitting Bar Code Data To Host; Transferring Data From A Batch Scanner; Transferring Data From An Rf Scanner - Motorola Symbol CS3000 Series Product Reference Manual

2 - 2 Symbol CS3000 Series Scanner Product Reference Guide
The scanner beeps and the LED turns green to indicate a successful decode. See
4.
beeper and LED definitions.
NOTE The scanner cannot scan bar codes when it is connected to the host via the USB host cable.

Deleting Bar Codes

In batch mode, to delete a bar code aim the scanner at the bar code and press the delete ( - ) button.
Deleting a Bar Code in Batch Mode
Figure 2-2
NOTE Bar codes cannot be deleted in Bluetooth mode.

Transmitting Bar Code Data to Host

Transferring Data from a Batch Scanner

The BarcodeFile.txt file within the
Connect the scanner to the host PC via USB host cable or the charging cradle and use Windows Explorer to
navigate to the scanner. Copy the bar code data file to the host
To clear the bar code data, delete the BarcodeFile.txt file from the scanner, or scan the
3-7.
Autorun Feature
The scanner supports an autorun feature where you can build an autorun.inf file to automatically copy the data to
the host upon connection. Autorun.inf is a text-based configuration file that defines, upon connecting the scanner,
which executable or application to run on the host, which icon represents the scanner, and which menu commands
appear when you right-click the scanner icon from Windows Explorer. For more information, search
any search engine.

Transferring Data from an RF Scanner

When the scanner is paired to a host via Bluetooth, data transmits to the host after each scan and is not stored on
the device.
directory on the scanner stores scanned bar code data.
\Scanned Barcodes
Table 2-1 and Table 2-2 for
bar code on page
Clear Data
on
autorun.inf