Checking The Print Alignment - Brother DCP-J4110DW Basic User's Manual

NOTE
When a print head nozzle is clogged, the
printed sample looks like this.
A4, Letter and Executive
A3, Ledger, Legal, A5, A6, envelopes,
Photo (10  15 cm), Photo L
(89  127 mm), Photo 2L (13  18 cm)
and Index Card (127  203 mm)
After the print head nozzle is cleaned, the
horizontal lines are gone.

Checking the print alignment

If your printed text becomes blurred or
images become faded, you may need to
adjust the print alignment after transporting
the machine.
a
Press (Settings).
52
NOTE
If is on the Touchscreen, you can
press it, and then go to step e.
b
Press s or t on the Touchpanel to
display General Setup.
c
Press General Setup.
d
Press Ink.
e
Press Test Print.
f
Press Alignment.
g
Press Start.
The machine starts printing the
Alignment Check Sheet.
h
For the "A" pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
i
For the "B" pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
j
For the "C" pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
A
k
For the "D" pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
l
Press .