1.8" Touchscreen Lcd - Brother DCP-J4110DW Basic User's Manual

Chapter 1
4 Power On/Off
Press to turn the machine on.
Press and hold down
off. The Touchscreen LCD will show
Shutting Down and will stay on for a few
seconds before turning off.
If you turn the machine off using
periodically clean the print head to maintain
print quality. To prolong the life of the print
head, provide better ink efficiency and maintain
print quality, you should keep your machine
connected to the power at all times.

1.8" Touchscreen LCD

The Touchscreen LCD shows the machine's
status when the machine is idle.
1 2
5
7
6
1 Ink
Lets you see the available ink volume. Also,
lets you access the Ink menu.
6
to turn the machine
, it will still
1
3
4
2 Copy
Lets you access the Copy mode.
3 Scan
Lets you access the Scan mode.
4 Settings
Lets you access the full Settings menu.
5 Web
Lets you connect the Brother machine to an
Internet service when you press
For more information,
see the Web Connect Guide.
6 Photo
Lets you access Photo mode when you press
t, and then press
7 Wireless Status
A four-level indicator on the Ready mode
screen shows the current wireless signal
strength if you are using a wireless connection.
0
If you see at the top on the screen, you
can easily configure the wireless settings by
pressing it. For more information, see Quick
Setup Guide.
The warning icon
an error or maintenance message. For
information about error messages, see Error
and Maintenance messages on page 54.
.
.
Max
appears when there is