STEP NINE
a. Place the electronic igniter into the igniter hole on
the front left of the side burner shelf. To help ease
the installation of the wires, make certain that the
igniter wire tabs are facing outwards from the grill.
b. Secure the igniter in place using the plastic lock nut.
Make sure to tighten securely.
c. Install AA battery, negative side first.
d. Install spring and cap assembly and tighten
securely.
e. Attach loose wire to bottom of cast burner, and then
to any of the open tabs in the igniter. Insert the
four igniter wires fed through the grommeted hole
on side of grill cart in Step 7b into the remaining
four holes.
Note: The igniter is designed in such a way
that it does not matter which terminal tab is
used when connecting igniter wires.
SS 5 Assembly
9a
9c
9d
9b
Close-up of igniter wires attaching to igniter.
Close-up of igniter wire attaching to burner.
9e
16