Amana SS 5 Use And Care Manual page 14

Burner grill w/ rear burner
Hide thumbs Also See for SS 5:
Table of Contents

Advertisement

STEP SEVEN
a. On the inside bottom of the side burner assembly
you will find the brass burner cap attached with
tape. Remove and set aside.
b. Feed the side burner gas supply hose assembly
and two igniter wires through the grommeted hole
in the side of the cart.
c. Place a piece of styrofoam from the packaging in
the grill to leave the grill hood propped open
slightly.
d. Attach the right side burner shelf by inserting the
four shelf hooks into the slots on the side of the
grill.
e. After inserting the four shelf hooks, press the shelf
against the grill and press downward until the
shelf locks in place. Make sure the top trim strip
is all the way inside of the grill before pressing
downward.
f. Using a self-tapping screw, attach side burner shelf
assembly to the grill.
SS 5 Assembly
7c
14
7e
7f
7b
7d

Advertisement

Table of Contents
loading

Table of Contents