Outbound Telnet; Overview; Cli Examples - D-Link DWS-3000 Series Configuration Manual

Outbound Telnet

This section describes the Outbound Telnet feature.

Overview

Outbound Telnet:
•
Feature establishes an outbound telnet connection between a device and a remote host.
•
When a telnet connection is initiated, each side of the connection is assumed to originate
and terminate at a "Network Virtual Terminal" (NVT).
•
Server and user hosts do not maintain information about the characteristics of each other's
terminals and terminal handling conventions.
•
Must use a valid IP address.

CLI Examples

The following are examples of the commands used in the Outbound Telnet feature.
26
Overview 173