Example #5: Copy Nvram: Script; Example #6: Script Validate Running-Config.scr - D-Link DWS-3000 Series Configuration Manual

Example #5: copy nvram: script

Use this command to upload a configuration script.
(DWS-3024) #copy nvram: script running-config.scr
tftp://192.168.77.52/running-config.scr
Mode......................... TFTP
Set TFTP Server IP........... 192.168.77.52
TFTP Path.................... ./
TFTP Filename................ running-config.scr
Data Type.................... Config Script
Source Filename.............. running-config.scr
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.

Example #6: script validate running-config.scr

(DWS-3024)#script validate running-config.scr
serviceport protocol none
network protocol dhcp
no network javamode
vlan database
exit
configure
exit
logging buffered
logging host 192.168.77.151
Configuration script 'running-config.scr' validated.
(DWS-3024)
Are you sure you want to apply the configuration script? (y/n) y
The system has unsaved changes.
Would you like to save them now? (y/n) y
Configuration Saved!
#script apply running-config.scr
25 Configuration Scripting
CLI Examples 171