Captive Portal; Web Example - D-Link DWS-3000 Series Configuration Manual

Captive Portal

The Captive Portal (CP) feature allows you to block wired and wireless clients from accessing
the network until user verification has been established.
The example in this section shows how to configure a captive portal and associate it with a
physical interface so that any wired client that attempts to access the network through that
interface must enter a username and password that is verified by a local user database.

Web Example

Use the following steps to configure a captive portal for wired clients that connect to the
network by using interfaces 0/1–0/10.
1. Enable the captive portal.
A. Navigate to the LAN > Security > Captive Portal > Global Configuration page.
B. Select the Enable Captive Portal option.
C. Click Submit.
2. Configure the captive portal.
A. Navigate to the LAN > Security > Captive Portal > CP Configuration page and
B. From the Verification Mode field, select Local.
click the Default tab.
17
Web Example 111