Configuring The Color-Aware Attribute By Using The Web - D-Link DWS-3000 Series Configuration Manual

Configuring the Color-Aware Attribute by Using the Web

The following screens show the additional steps to take to configure the finance_dept class
with a color-aware attribute.
1. Add a new class to serve as the auxiliary traffic class.
A. From the Class Selector menu on the DiffServ Class Configuration page, select
Create.
B. After the screen refreshes, enter color_class in the Class field.
C. Select All as the Class Type.
D. Click Submit.
The screen refreshes, and the Class Match Selector field appears. The match condition for
the class must be either IP Precedence or IP DSCP. In this example, the match condition is
IP Precedence with a value of 2.
2. From the Class Match Selector field, select IP Precedence and click Add Match Criteria.
3. From the Precedence Value menu on the IP Precedence page, select 2, and then click
Submit.
4. Navigate to the Policy Class Definition page to configure the additional policy attributes
for the finance_dept class.
A. Make sure Police Simple is selected from the Policy Attribute Selector menu, and
then click Configure Selected Attribute.
B. From the Color Mode field on the Policing Attributes page, select Color Aware, and
then click Confirm.
22
Using the Web Interface to Configure Diffserv
Differentiated Services
159