Example #1: Show Network; Example #2: Show Telnet; Example #3: Transport Output Telnet; Example #4: Session-Limit And Session-Timeout - D-Link DWS-3000 Series Configuration Manual

Configuration Guide

Example #1: show network

(DWS-3024) >telnet 192.168.77.151
Trying 192.168.77.151...
(DWS-3024)
User:admin
Password:
(DWS-3024)>enable
Password:
(DWS-3024)#show network
IP Address...............................192.168.77.151
Subnet Mask..............................255.255.255.0
Default Gateway..........................192.168.77.127
Burned In MAC Address....................00:10:18.82.04:E9
Locally Administered MAC Address.........00:00:00:00:00:00
MAC Address Type.........................Burned In
Network Configuration Protocol Current...DHCP
Management VLAN ID.......................1
Web Mode.................................Enable
Java Mode ...............................Disable

Example #2: show telnet

(DWS-3024)#show telnet
Outbound Telnet Login Timeout (minutes)........5
Maximum Number of Outbound Telnet Sessions.....5
Allow New Outbound Telnet Sessions.............Yes

Example #3: transport output telnet

(DWS-3024) (Config)#lineconfig ?
<cr>
(DWS-3024) (Config)#lineconfig
(DWS-3024) (Line)#transport ?
input
output
(DWS-3024) (Line)#transport output ?
telnet
(DWS-3024) (Line)#transport output telnet ?
<cr>
(DWS-3024) (Line)#transport output telnet
(DWS-3024) (Line)#

Example #4: session-limit and session-timeout

(DWS-3024) (Line)#session-limit ?
174 © 2001- 2011 D-Link Corporation. All Rights Reserved.
Press Enter to execute the command.
Displays the protocols to use to connect to a
specific line of the router.
Displays the protocols to use for outgoing
connections from a line.
Allow or disallow new telnet sessions.
Press Enter to execute the command.