Table of Contents
Advertisement
D-Link Unified Access System User Manual
Example of Configuring L3 Roaming by Using the Web Interface
The following steps shows the procedures to configure the L3 Tunnel Network by using the
Web interface on the switch.
1. From the Administration > Basic Setup > SSID tab, select the check box next to the
SSID to configure and click Edit.
2. From Wireless Network Configuration page, configure the following settings:
-
-
-
-
-
The L3 Tunnel Subnet is the network IP address of the VLAN routing interface configured
in the procedures for
3. Click Submit to save the changes to the L3 Tunnel network configuration.
222
© 2001- 2008 D-Link Corporation. All Rights Reserved.
SSID—L3 Tunnel
L3 Tunnel check box—Selected
L3 Tunnel Subnet—192.168.60.0
L3 Tunnel Mask—255.255.255.0.
Security—WPA/PSK.
Creating the VLAN Routing
Interface.
Advertisement
Table of Contents
