Before Starting; Starting The Engine - Dixon SZ4619 CA Operator's Manual

Before Starting

• Read the sections Safety Instructions and
Controls before starting the machine.
• Perform the daily maintenance before
starting (see Maintenance Schedule in the
Maintenance section).
• Check that there is sufficient fuel in the fuel
tank.
• Adjust the seat to the desired position.
The following conditions must be fulfilled before the
engine can be started:
• The blade switch for engaging the mower
blades must be depressed.
• The parking brake must be on.
• Both steering controls must be in the locked
(outer) neutral position.

Starting the Engine

• Sit on the seat.
• Raise the mower deck by pushing the release
button on the top of the lifting lever. Pull the lifting
lever backward to the locked (transport) position.
• Activate the parking brake by pushing the release
button in and pulling the lever fully upwards.
Disengage the mower blades by depressing the
blade switch.
OpERATION
Cut height lift lever
Released parking brake
Blade switch
8058-019
8058-092
8050-900
25