MSI -5149 User Manual page 44

Chapter 3 AMI
Note: If the memory hole is set for 15-16M and the on-
board memory is greater than 16M, some testing
application will only test 14M and report only 14M
memory to the system.
DRAM TIMING:
Note : If 60ns and 70ns memory are used at the same
time, then the dram timing must be set to 70ns.
8 Bit I/O
Recovery Time
16 Bit I/O
Recovery Time
USB
®
BIOS USER'S GUIDE
range will not be used and OS demand
in this area will be passed to the ISA
bus.
Auto: the system default setting is
60ns for EDO and 70ns for Fast
Page. If the memory specifications
are different from Auto, change the
option to manual, and set 60ns or
70ns according the memory installed.
Choose the time (system clock) to be
inserted when two continuous 8 bit
I/O cycle occur.
Choose the time (system clock) to be
inserted when two continuous 16 bit
I/O cycle occur.
This function is reserved, and the default
setting is disabled.
3-10