Cpu Installation Procedure - MSI -5149 User Manual

The MS-5149 motherboard operates with Intel
®
Pentium processor with MMX technology, Cyrix
®
and AMD 5K86/K6 processors. It could operate with 2.8V to 3.52V
processors. The motherboard provides a 321-pin ZIF Socket 7 for easy CPU
installation, a DIP switch (SW1) to set the proper speed for the CPU and a
Jumper block (JV1 - JV4, JV5) for setting the CPU voltage. The CPU should
always have a cooling fan attached to prevent overheating.

2.1-1 CPU Installation Procedure

1. Pull the lever sideways away
from the socket. Then raise
the lever up to a 90-degree
angle.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CPU. Match
Pin 1 with the white dot/cut
edge. Then insert the CPU.
It should insert easily.
3. Press the lever down to
complete the installation.
®
Pentium
®
6x86/6x86L/6x86MX,
Sliding
Plate
CPU
2-1
®
processors/
Open Lever
Pin 1
White dot/
Cut edge
CPU
Close
Lever