Base Server Standard Capabilities And Features - Cisco UCS C22 M3 Spec Sheet

BASE SERVER STANDARD CAPABILITIES and FEATURES

BASE SERVER STANDARD CAPABILITIES and FEATURES
Table 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in CONFIGURING the SERVER, page
Table 1 Capabilities and Features
Capability/Feature
Chassis
CPU
Chipset
Memory
NIC
Expansion slots
Internal storage devices
Video
6
9.
Description
Single rack unit (1RU) chassis
One or two Intel® Xeon E5-2400 v2 or E5-2400 series processor family CPUs
Intel C600 chipset
12 DIMM slots
Embedded dual-port Intel I350 PCIe-based Gigabit Ethernet controller
Two riser cards with one PCIe card slot in each riser
Riser 1 (controlled by CPU 1)
■
• Slot 1: PCIe Gen 3 slot, x16 extended connector (Cisco CNIC),
half-length, full-height, with NCSI
Cisco 1225 virtual interface card requires an NCSI slot.
Riser 2 (controlled by CPU 2)
■
• Slot 2: PCIe Gen 3 slot, x8 connector, half-length, half-height, no
NCSI support
Up to eight 2.5-inch SAS+SATA hot-swappable hard disk drives (HDDs) or
■
solid state drives (SSDs)
One connector on the motherboard that can accommodate a USB 2.0
■
drive. You can order an 8 GB drive for this connector and use it as a
hypervisor or license dongle. The 8 GB USB drive comes blank. Or, you
can order a 16 GB drive that contains preloaded drivers and utilities.
The Emulex Pilot 3 Integrated Baseboard Management Controller provides
video:
Matrox G200e video controller
■
Integrated 2D graphics core with hardware acceleration
■
Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at
■
60 Hz
24-bit color depth for all resolutions less than 1600x1200
■
256 MB video memory
■
1 and Cisco CNIC
Cisco UCS C22 M3 High-Density SFF Rack-Mount Server
2 support. The