Cisco UCS C22 M3 Spec Sheet page 27

High-density rack-mount server (small form factor hard disk drive model)

Hide thumbs Also See for UCS C22 M3:

Table of Contents

Approved Configurations

(1) Choose Up to Two SFP+ Modules for Each Network Card Ordered

You may choose one or two SFP+ optical modules cables for each compatible PCIe network

■

card ordered. You would normally order two modules for connecting to the primary and

redundant network switching equipment. With the SFP+ optical modules, you can use

common fiber optic cables, widely available.

See

Figure 5 on page 29

Caveats

Check the table on the following page for compatibility between the PCIe network cards and

SFPs or twinax cables.

Cisco UCS C22 M3 High-Density SFF Rack-Mount Server

for typical SFP+ and twinax connections to the network cards.

CONFIGURING the SERVER

Table of Contents