Usb/Ipod/Divx Setup - Kenwood DNX9990HD Quick Start Manual

Return to the Top page
CD, Disc, iPod, USB device
Voice memo
1
Touch [ ] in the control screen.
Status bar
Confirms the current location.
[Start]
Starts recording the voice memo.
[Stop]
Stops recording the voice memo.
[Send]
Sends the recorded voice memo.
[Cancel]
Cancels the voice memo and returns to the
control screen.
NOTE
• This function is available from an iPhone
connected via the KCA-iP202 (optional accessory).
• This function is not available from an Android
device connected via Bluetooth.
42 42
Navigate
Sets the location information received from
Aha at the destination of navigation.
1
Touch [ ] in the control screen.
[Save]
Saves the location information.
[Go!]
Sets the location information at the destination
and starts navigation.

USB/iPod/DivX Setup

You can perform setup when using USB/
iPod/ DivX.
NOTE
• Each operation in this section can be started from
Operating
the Top Menu screen. For details, see
With The Top Menu Screen (P.11).
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [USB], [iPod] or [DivX] in the list.
Each setup screen appears.
See the following section for each setting.
• USB setup (P.43)
iPod setup (P.44)
•
• DivX setup (P.44)
Return to the Top page
CD, Disc, iPod, USB device
USB setup
1
Set each item as follows.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB
Sets how to display the information of the USB
device.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
43