Lorex L19WD800 Series Instruction Manual page 36

Using the System
FACTORY DEFAULT
Reset factory defaults on System, Channel
Data, PTZ, Network, or Record data.
Note: Resetting factory defaults will not
erase recorded data from your hard disk.
To reset factory defaults:
• Check the box, SELECT ALL, to reset all
settings
OR
• Check the individual boxes for SYSTEM,
CHANNEL, PTZ, NETWORK, and
RECORD settings.
Click OK to save your settings, or click
DEFAULT to restore factory defaults.
Note: Network is excluded from
SELECT ALL. To reset your network
settings to factory defaults, check the
Network box individually.
36