Mouse Control; Using The Mouse - Lorex L19WD800 Series Instruction Manual

Mouse Control

Mouse Control
This system has been designed to use a PS/2 mouse or remote control as its primary methods
of navigation and configuration. Connect the mouse to the PS/2 port located on the rear panel
before powering on the system. Once the unit has loaded, the mouse will be recognized by the
system.

Using the mouse

The mouse functions in the same manner as a PC mouse. Use the left and right buttons to open
menus and change options.
Left Button
Click:
• Select options and
change values in
menus, Recording
mode, and Search
mode
• Operate controls in
PTZ mode
Double-click:
• Double-click on a
channel in Quad or
split-screen view to
view the channel in
full-screen.
16
Right Button
Right-click:
• Switch between active
camera channels in full-
screen mode, or switch
between groups of channels
in Quad or split-screen views
• Motion Setup: Set motion
cells
• Digital Information Display
(DID): While running, right-
click in top-right corner of
screen to return to Live
Mode
Scroll-Wheel
• In PTZ Mode, Scroll Up
to Zoom In, Scroll Down
to Zoom Out.
• Changes values in
certain menus.