Lorex L19WD800 Series Instruction Manual page 10

Front Panel
Front Panel
1
1. IR Sensor: Receives the infrared signal from the remote control.
2. Function Buttons: The left set of function buttons consist of the following:
•
Menu: Press to enter the System Main Menu; press and hold to power off the
monitor.
•
Mode: Switch between screen displays – full-screen, quad, and split-screen view.
•
Search: Search for recorded video on the HDD.
•
Zoom: Zoom in/out of an image using digital zoom.
•
PTZ: Open the control menu for Pan, Tilt, Zoom – a PTZ camera (not included)
must be connected to the system to make use of the PTZ menu.
•
SEQ: Activate sequence function in any display mode.
•
FRZ: Freeze live image.
•
PIP: Picture-in-Picture mode.
3. Numeric Keypad and Playback Buttons*:
•
1~8: Press to view each channel of the system in full-screen mode.
•
1+: In PTZ Mode: zoom in.
•
2-: In PTZ Mode: zoom out.
•
3+: In PTZ Mode, channel up.
•
4-: In PTZ Mode, channel down.
*Only on L19WD800. 16-button numeric keypad found on L19WD1600.
10
2 3
4
8-channel model shown