Lorex L19WD800 Series Instruction Manual page 58

Appendix 3: Setting Up Remote Viewing
5. I have configured DDNS for remote access to my system:
Go to www.lorexddns.net
Domain:
User ID:
Password:
6. I have configured my system to connect to the DDNS server:
i. From the System Main Menu click NETWORK, and then click DDNS.
ii. Check the DDNS box.
iii. Enter your Domain, User ID, and User Password.
iv. Click OK to check the status of the DDNS connection.
Note: A success message should appear; if not, check your connections and
DDNS account information.
7. I have configured the Lorex Client Software:
If you are connecting from within your network (i.e. the System and PC are both inside your
house), you only need to enter the IP Address of your system into when configuring the
Client software
If you are connecting from outside your network (i.e. the System is at home and your PC at
work), use the DDNS domain name to configure the software.
58
and create a new account