LG 47/55LX9500 Owner's Manual page 95

Led lcd tv / plasma tv
Table of Contents

Advertisement

Magic Motion Remote Control Registration
The Magic Motion Remote Control operates by pairing with your TV.
Register the Magic Motion Remote Control after purchasing the TV.
How to use Magic Motion Remote Control
Press this button if there is no pointer on your TV screen. The pointer will then appear on the
1
screen.
ENTER
If the pointer has not been used for a certain period of time, it will disappear.
2
Precautions to Take when Using the Magic Motion Remote Control
Use the remote control within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or with an
object obstructing it, may cause a communica-
tion failure.
A communication failure may occur due to near-
by devices. Electrical devices such as a micro-
wave oven or wireless LAN product may cause
interference, as this will use the same bandwidth
(2.4 GHz) as the Magic Motion Remote Control.
The Magic Motion Remote Control may be dam-
aged or may malfunction if it is dropped or
receives a heavy impact.
When playing a game using the Magic Motion
Remote Control, hold it securely by wrapping its
strap around your wrist and adjusting the length
with the adjustable ring.
Take care not to bump into nearby furniture or
other people when using the Magic Motion
Remote Control.
How to register the Magic Motion Remote Control
To register the Remote Control, press the ENTER button on the
ENTER
Remote Control while aiming it at your TV.
How to Re-register the Magic Motion Remote Control after
Registration Failure
Reset the remote control by pressing and holding both the
MUTE
ENTER and MUTE buttons for 5 seconds. (Once the reset is
complete, the light on the Pointer RF Receiver blinks.) Then
repeat the above procedure to register the remote control.
You can move the pointer by aiming the Pointer Receiver of the remote
control at your TV then move it left, right, up or down.
If the pointer does not work properly after clicking the OK button, leave the
remote control for 10 seconds then use it again.
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents