(47LX9 *** ) Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV. Wireless Media Box Wireless LAN for Broadband/...
CONTENTS CI [Common Interface] Information ....50 PREPARATION Software Update ..........51 Picture/Sound test ..........53 LED LCD TV Models : 47/55LX9 *** ....A-1 Signal Test ............54 LED LCD TV Models : 47/55LEX8 * ....A-11 Product/service information.......55 Network Test ............56 EXTERNAL EQUIPMENT SETUP Simple Manual ..........56 Selecting the Programme List ......57 Antenna Connection ..........1...
CONTENTS GAME/SCHEDULE On-Screen Menu Language / Country Selection ..150 Language Selection ........151 Game/Schedule ..........112 TIME SETTING EPG(ELECTRONIC PROGRAMME Clock Setup .............153 GUIDE)(IN DIGITAL MODE) Auto On/Off Time Setting ........154 Sleep Timer Setting .........155 Extended Description ........118 Manual Timer ..........119 PARENTAL CONTROL / RATINGS Schedule List ...........120 PICTURE CONTROL Set Password &...
PREPARATION LED LCD TV MODELS : 47/55LX9 *** ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Owner’s Manual Batteries Remote Control...
PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
BACK PANEL INFORMATION ■ Image shown may differ from your TV. CAUTION ► Use a product with the following thickness for optimal connection to HDMI cable (Only HDMI IN 4) / USB device. 10 mm Power Cord Socket RGB IN Input This TV operates on an AC power.
PREPARATION STAND INSTALLATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. When assembling the desk type stand, check ■ Image shown may differ from your TV. whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product Secure the power cord with the Cable installation.) If you tighten the bolt with excessive...
CAREFUL INSTALLATION KENSINGTON SECURITY ADVICE SYSTEM ■ You should purchase necessary components ■ This feature is not available for all models. to fix the TV safety and secure to the wall on ■ Image shown may differ from your TV. the market.
INSTALLATION 55LX9 *** 400 * 400 ■ We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. ■ We recommend that you purchase a wall mount- ing bracket which supports VESA standard.
REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Switches the TV on from standby or off to standby. (POWER) LIGHT You can turn the light of the remote control button on or off.
PREPARATION 0 to 9 number Selects a programme. button Selects numbered items in a menu. (Space) Opens an empty space on the screen keyboard. LIST Displays the programme table. (► p.57) Q.VIEW Returns to the previously viewed programme. Coloured These buttons are used for teletext (on TELETEXT models only), Programme edit.
VOLUME UP Adjusts the volume. /DOWN MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. Displays the selected favourite programme. CHAR/NUM Shifts the Character or Number for NetCast menu. Use this to view 3D video. (►...
PREPARATION MAGIC MOTION REMOTE CONTROL KEY FUNCTIONS Pointer Blinks the light when operating. Receiver Switches the TV on from standby or off to standby. POWER Appears the pointer. HOME MENU VOLUME UP Adjusts the volume. /DOWN Programme Selects a programme. UP/DOWN MUTE Switches the sound on or off.
LED LCD TV MODELS : 47/55LEX8 * ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Remote Control Motion Remote Control, Owner’s Manual...
PREPARATION M4 x 7 M4 x 14 M3 x 6 Bolts for stand and wall mounting bracket assembly Wall Anchor Screw This item is not included for all models. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
PREPARATION BACK PANEL INFORMATION ■ ■ Image■shown■may■differ■from■your■TV. USB IN HDMI/DVI AV IN2 ANTENNA/ CABLE IN (RGB) /AUDIO VIDEO/AUDIO HDMI IN AV IN2 Power Cord Socket USB Input /AUDIO VIDEO/AUDIO AC IN This■TV■operates■on■an■AC■power.■The■volt- Connect■USB■storage■device■to■this■jack. age■is■indicated■on■the■Specifications■page.■ (►■p.168■to■171)■Never■attempt■to■operate■ HDMI/DVI IN Input the■TV■on■DC■power.■ Connect■an■HDMI■signal■to■HDMI■IN.■Or■DVI■ (VIDEO)■signal■to■HDMI/DVI■port■with■DVI■to■...
STAND INSTALLATION ■ ■ Image■shown■may■differ■from■your■TV. When■assembling■the■desk■type■stand,■check■whether■the■bolt■is■fully■tightened.■(If■not■tightened■fully,■ the■product■can■tilt■forward■after■the■product■installation.)■If■you■tighten■the■bolt■with■excessive■force,■ the■bolt■can■deviate■from■abrasion■of■the■tightening■part■of■the■bolt.■ 4■ ■ ■ ■ Use■the■Display Link Cable■(for■stand;■the■ Place■the■stand■base■facing■down■on■a■ shorter■one)■to■connect■the■Stand Base■ table■or■flat■surface.■Assemble■the■Stand and■the■display■link■input■on■the■TV.■After■ Body■with■the■Stand Base■using■the■ connection,■fasten■the■screws■with■a■driver■ screws■provided■with■the■TV■set. to■mount■the■cable■tightly. Stand Base M4 X 7 Stand Body 5■ ■ ■ ■ Carefully■place■the■TV■screen■side■down■ Place■the■Stand Rear Cover■properly on■a■cushioned■surface■to■protect■the■...
PREPARATION BACK COVER FOR KENSINGTON SECURITY WIRE ARRANGEMENT SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. ■ Image shown may differ from your TV. Secure the power cord with the Cable The TV is equipped with a Kensington Security Holder on the TV back cover.
CAREFUL INSTALLATION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ADVICE ■ The TV is designed to be mounted horizontally. ■ You should purchase necessary components EARTHING to fix the TV safety and secure to the wall on the market.
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Switches the TV on from standby or off to standby. (POWER) LIGHT You can turn the light of the remote control button on or off.
0 to 9 number Selects a programme. button Selects numbered items in a menu. (Space) Opens an empty space on the screen keyboard. LIST Displays the programme table. (► p.57) Q.VIEW Returns to the previously viewed programme. Coloured These buttons are used for teletext (on TELETEXT models only), Programme edit.
PREPARATION VOLUME UP Adjusts the volume. /DOWN MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. Displays the selected favourite programme. CHAR/NUM Shifts the Character or Number for NetCast menu. Use this to view 3D video. (►...
MAGIC MOTION REMOTE CONTROL KEY FUNCTIONS Pointer Blinks the light when operating. Receiver Switches the TV on from standby or off to standby. POWER Appears the pointer. HOME MENU VOLUME UP Adjusts the volume. /DOWN Programme Selects a programme. UP/DOWN MUTE Switches the sound on or off.
EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. Except for 47/55LEX8 * Only 47/55LEX8 * Multi-family Dwellings/Apartments...
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 47/55LX9 *** models. ■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE This TV can receive Digital RF/Cable signals without an external digital set-top box.
CONNECTING WITH AN HDMI CABLE Except for 47/55LEX8 * Connect the HDMI output of the external equipment (digital set- top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/ DVI IN 3 or HDMI IN 4 jack on the TV. Turn on the external equipment.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE Except for 47/55LEX8 * Connect the digital set-top box or the DVI out- put of the PC to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/DVI IN 3 or HDMI IN 4 jack on the TV. Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
CONNECTING WITH A EURO SCART CABLE Except for 47/55LEX8 * Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV. Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) Select AV1 input source using the INPUT but- ton on the remote control.
EXTERNAL EQUIPMENT SETUP USB SETUP Except for 47/55LEX8 * Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV. After connecting the USB IN 1 or USB IN 2 jack, you use the USB function. ( p.80) ►...
CONNECTING WITH AN RCA CABLE Except for 47/55LEX8 * Connect the AUDIO/VIDEO jacks between TV and VCR or external equipment. Match the (RGB) jack colours (Video = yellow, Audio Left = white, and Audio Right = red) HDMI/DVI IN Insert a video tape into the VCR and press ANTEN PLAY on the VCR.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set- tings. Except for 47/55LEX8 * Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.
INSERTION OF A CI MODULE To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries. Except for 47/55LEX8 * Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.50.
EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio ( Optical ) Output port.
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. SCREEN PICTURE Move Prev. Move Resolution • Sharpness • Colour Auto Config. • Tint •...
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] SCREEN PICTURE Move Prev. Move 1024 x 768 Resolution • Sharpness • Colour 1280 x 768 Auto Config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. SCREEN Prev.
NETWORK SETUP Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Except for 47/55LEX8 * Connect the LAN port of the Modem or Router to the LAN port on the TV.
EXTERNAL EQUIPMENT SETUP Wired Network Setup If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For detail information, contact your internet provider or router manual. If you already set the Network Setting NETWORK...
■ This feature requires an always-on broadband internet connection. ■ You do not need to connect to a PC to use this function. ■ If Network Setting is not working, check your network conditions. Check the LAN cable and make sure your router has DHCP turned on if you wish to use the Auto Setting. ■...
For details, contact your ISP. ► Turn off all unused network equipment in your ► LG is not responsible for any malfunction of local home network. Some devices may gener- the TV and/or the internet connection feature ate network traffic.
Wireless Network Connection The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan network. Please use LG Wireless LAN for Broadband/DLNA Adaptor. The network configuration and connection method may vary depending on the equipment in use and the network environment.
EXTERNAL EQUIPMENT SETUP Wireless Network Setup Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. If you already set the Network Setting NETWORK Move Select the wireless network setting type. •...
When a security code is already set PIN (Personal Identification Number) If you want to connect the AP (Access Point) or router with PIN, use this feature. Selecting AP Connecting with PIN mode Select AP you want to connect. Page 1/1 Insert PIN number at the AP webpage and press ‘Connect’...
EXTERNAL EQUIPMENT SETUP Simple setting (WPS-button mode) If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available to use your access point or wireless router within 120 counts. You do not need to know the access point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Ad-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. Select the wireless network setting type. Setting Ad-hoc network Setting Ad-hoc network Select the wireless network setting type.
EXTERNAL EQUIPMENT SETUP Network Status Network Status NETWORK Move • Network Setting : Wired • Network Status : Not connected • Network Status : Internet is connected Network connecting • Legal Notice Setting Test Close Select the wireless network setting type. Network Setting Select the wireless network setting type.
Registering the Magic Motion Remote Control The Magic Motion Remote Control operates by pairing with your TV. After purchasing an LG TV, register the Magic Motion Remote Control with the TV. How to Register the Magic Motion Remote Control To register the Remote Control, press the OK button on the Remote Control while aiming it at your TV.
WATCHING TV / PROGRAMME CONTROL How to Use the Magic Motion Remote Control Press this button if there is no pointer on your TV screen. The pointer will then appear on the screen. If the pointer has not been used for a certain period of time, it will disappear.
Pointer Menu Options Simple Manual Pointer Exit Home Menu Quick Menu Today Today Today Today Today Today Programme List GUIDE INPUT NETCAST MY MEDIA GAME/SCHEDULE QUICK MENU Netcast Screen Remote ▶ • Speed Normal ◄ ► • Shape Type A ◄...
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT or P button on the TV or press the POWER, INPUT, P...
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture for- Audio or Audio Language : Selects the mat.
WATCHING TV / PROGRAMME CONTROL HOME MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Select Home Menu. Select a menu item. Simple Manual Exit Pointer Home Menu Quick Menu Today Today Today Today Today Today...
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. • Press the RED button, you can check the Display each menu. Customer Support menu. • Press the GREEN button, you can check the Simple Manual menu.
WATCHING TV / PROGRAMME CONTROL LOCK OPTION Move Move Set Password Language(Language) ● ● Lock System : Off LOCK Country : UK ● OPTION ● Block Programme ● Disability Assistance ● Parental Guidance : Blocking Off ● Power Indicator ● Input Block ●...
AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1,000. But the number may differ slightly depending on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL If you want to select the Cable, SETUP SETUP SETUP Move Move Move Please select your TV Connection. Service Operator Auto Tuning Auto Tuning Auto Tuning Auto Tuning Auto Tuning ● ● ● ● ● ● ●...
■ When you select the Quick, Home Tuning Quick Cable Quick ◄ ► Frequency(kHz) Start Frequency(kHz) : 114000 Start Frequency(kHz) : 114000 ● 362000 Cable Symbol rate(kS/s) End Frequency(kHz) : 862000 End Frequency(kHz) : 862000 ● 6900 Check your antenna connection. Modulation Network : Auto...
WATCHING TV / PROGRAMME CONTROL ■ When you select the Full, Cable Full Search every available signal. Cable Check your antenna connection. The previous channel information will be updated during Auto Tuning. Skip Scramble Programme Automatic Numbering Start Close Close If you wish to keep on auto tuning, select •...
The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels.
WATCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. If you want to select the Antenna, SETUP SETUP Move Move ◄ ► Auto Tuning Auto Tuning ● ● UHF CH. Manual Tuning Manual Tuning Manual Tuning Manual Tuning...
WATCHING TV / PROGRAMME CONTROL If you want to select the Cable, SETUP SETUP ◄ ► Cable DTV Move Move Auto Tuning Auto Tuning Frequency(kHz) ● ● 362000 Manual Tuning Manual Tuning Manual Tuning Manual Tuning ● ● ● ● Symbol rate(kS/s) 6875 Programme Edit...
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP SETUP Move Move Auto Tuning Auto Tuning ● ● ◄ ► Manual Tuning Manual Tuning Manual Tuning Manual Tuning ●...
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■ Skipping a programme number • When programmes are to be skipped, the skipped programme shows in blue and Select a programme number to be skipped. these programmes will not be selected by the P buttons during TV viewing.
■ Skipping a programme number • When a programme number is skipped it means that you will be unable to select it Select a programme number to be skipped. using the P button during normal TV viewing. • If you wish to select a skipped programme, BLUE Turn the programme number to blue.
WATCHING TV / PROGRAMME CONTROL ■ Selecting favourite programme group Select your desired programme. Display a pop-up window where Favourite group can be changed. Select a Favourite group.
BOOSTER If reception is poor select Booster to "On". When the signal is strong, select "Off". SETUP SETUP Move Move Auto Tuning Auto Tuning ● ● Manual Tuning Manual Tuning ● ● Programme Edit Programme Edit ● ● Booster Booster : Off : On Booster...
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer.
You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV. Software Update...
WATCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally, a transmission of TV is restarted when download Download starts when "Yes" is updated digital software infor- is completed. selected. mation will result in the following Download progress status can menu on the TV screen.
PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. Software Update Picture Test Picture Test Do you have a problem in this test Sound Test screen? Signal Test Product/Service Info. Network Test Close Select Customer Support.
This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple chan- nels.)) Engineering Diagnostics Manufacturer : LG Electronics Inc. Model/Type : 47LX9500-ZA Software Update Serial No. : SKJY1107 Picture Test Software Version : V00.00.01...
PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. Software Update Picture Test Sound Test Signal Test Product/Service Info. Product/Service Info. Network Test Close Select Customer Support. Select Product/Service Info.. Display Model/Type, Software version, Serial Number, Customer service center and Homepage.
WATCHING TV / PROGRAMME CONTROL NETWORK TEST Check the network status. Network Status Software Update Picture Test Sound Test Network connecting Signal Test Product/Service Info. Network Test Network Test Close Setting Test Close Select Customer Support. • Press the MENU/EXIT button to Select Network Test.
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Programme List Home Menu Displayed when the Page 1/1 Locked Programme. 1 BBC Quick Menu 2 BBC Programme List 3 BBC 4 BBC Netcast...
WATCHING TV / PROGRAMME CONTROL SELECTING THE FAVOURITE PROGRAMME LIST Favourite programmes are a convenient feature that lets you quickly select programmes of your choice without waiting for the TV to select all the in-between programmes. Favourite List Programme List ◄...
INPUT LIST HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. Simple Manual Pointer Exit Home Menu Quick Menu Today Today Today Today Today Today Programme List GUIDE NETCAST MY MEDIA GAME/SCHEDULE QUICK MENU INPUT Netcast Screen Remote ■...
DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected. When this function is in operation, Screen Remote Menu’s number key does not work.
WATCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
Connecting to Home Theater with the SIMPLINK logo. Except for 47/55LEX8 * Connect the HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/DVI IN 3 or HDMI IN 4 terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the , OK, ►, ▀ , l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional set- tings.
SIMPLINK Menu Press the button and then OK button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV pro- gramme regardless of the current mode. ꔉ OK ꕉ Exit ◀ ▶ ◀ ▶ DISC playback : Select and play connected discs.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Disables the AV MODE. Cinema Optimizes video and audio for watching movies. Sport Optimizes video and audio for watching sports events. Game Optimizes video and audio for playing games.
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, ▼...
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and LG makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which LG has no control.
Many ISPs offer a variety of broadband speed options. ► To view the owner’s manual that provided by the Content Provider, visit our website at http://www.lg.com. ► To see the activation method of Orange or maxdome, click the Orange, maxdome in the CD manual (Only Frence or German).
YOUTUBE YouTube is a video sharing website where users can upload, view, and share video clips. YouTube Screen Components YouTube menu Videos list Set the option menu. Return to Netcast menu. Return to TV viewing. NOTE ►When you press the Q.MENU button while the Youtube video is playing in full mode, you can set the video options.
NETCAST YouTube Service menu ● Home: You can watch the popular video in real time. ● Featured: The featured videos list will be displayed. ● Popular: The best rated videos list from YouTube server will be displayed. ● Most Viewed: The most viewed videos list will be displayed. ●...
►By default, New York, London and Paris are registered and the user can add/delete cities from Favorite City. ►LG is not responsible for the accuracy of the weather forecast. ►Applicable weather information can differ from the actual weather depending on the information...
NETCAST PICASA Picasa is an application from Google that appreciates digital image files. Picasa Screen Components Picasa menu Photos list Corresponding buttons on the remote control Select the desired photo. The selected photo file is displayed. Return to Netcast menu. Return to TV viewing.
Picasa Service menu ● Home: The featured photos list will be displayed. ● Friends: You can register users with the pictures you want as friends. You can add up to 10 friends. ● Search: The keypad/keyboard menu will be displayed. ●...
►To watch the TV in 3D, you must put on your 3D glasses. ►Do not use the TV in close proximity to other electronic For best results, you should wear LG Brand 3D glasses. equipment and IR equipment. The 3D imaging may not display properly when using ►In Analog TV, 3D Imaging does not work.
WHEN USING 3D GLASSES ►3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions. ►Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. ►Do not store the 3D glasses in hot or cold locations. ►Do not drop objects onto the 3D glasses.
3D IMAGING WATCHING 3D IMAGING Play the video produced in 3D. Refer to the following for the supported imaging. Horizontal Vertical Signal Resolution Playable 3D video format Frequency (kHz) Frequency (Hz) Top & Bottom, Side by Side HDMI (V. 1.4 with 3D), 89.9/90 59.94/60 Frame Packing...
Select Setting Left/Right or Left/Right image change. Put on 3D glasses. Power on your 3D glasses and put them on. Sit 2 meters from TV to enjoy the best Sit 2 meters from TV to enjoy the best 3D 3D view. view.
TO USE A USB OR PC DEVICE ENTRY MODE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated. When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu.
CONNECTION METHOD USB Connection Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV. Except for 47/55LEX8 * • Only photo(JPEG, MPO), music (MP3) and movie(DAT, MPG, MPEG, VOB, AVI, DIVX, MP4, MKV, TS, TRP, TP, ASF, WMV) are supported.
TO USE A USB OR PC DEVICE Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized. ►...
DLNA About DLNA This TV can display and play many types of movie, photo and music files from your DLNA server and has been certified by DLNA for photos. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies.
TO USE A USB OR PC DEVICE Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. Requirement PC system before you install Nero MediaHome 4 Essentials ■ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows®...
Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. Double-click the Nero MediaHome 4 Essentials icon on the desktop. Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV.
TO USE A USB OR PC DEVICE Playing back shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. Start the server on your computer or other device that connected on your home network. Select MY MEDIA.
MOVIE LIST You can play movie files on a USB or PC storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files.
TO USE A USB OR PC DEVICE Supported DivX file File Extensions Codec Profile/Level Support Explanation Advanced Profile@Level 3 VC-1 Advanced Profile Only streams compliant (e.g. 720p60, 1080i60, 1080p30) to SMPTE 421M VC-1 Video Simple Profile@Medium Level (e.g. CIF, QVGA) VC-1 Simple and Main standard are supported.
Screen Components You can also adjust USB in the INPUT menu. Select Home Menu. Select MY MEDIA. Select Movie List. Moves to upper level folder Page 1/1 Movie List Current page/Total pages Corresponding buttons on the Drive1 Page 1/1 USB1 External remote control Contents under the folder focused on...
TO USE A USB OR PC DEVICE Movie Selection ■ When playing movie files Page 1/1 Movie List Drive1 Page 1/1 USB1 External 051. Apple_ ..02:30:25 Play Page Change Change Device To Photo List Change Numbers Mark Mode Exit Select the target folder or drive.
■ When selected movie files are played Page 1/1 Movie List Mark Mode Drive1 Page 1/1 USB1 External 051. Apple_ ..02:30:25 Mark Page Change Exit Play Marked Mark All Unmark All Exit Mark Mode When one or more movie files are •...
TO USE A USB OR PC DEVICE Using the Movie List function, play Choose options. Set Video Play. Set Video. Set Audio. Set 3D video. ◄► ► 01:02:30 / 02:30:25 Previous Close ■ ► ◄◄ ►► Option Hide Exit Q.MENU Show the Option menu.
■ When you select the Set Video Play, Set Video Play. Picture Size Full ◄ ► Audio Language ◄ ► Subtitle Language ◄ ► ● Language English ◄ ► ● Code Page Default ◄ ► ● Sync ◄ ► ● Position ◄...
TO USE A USB OR PC DEVICE ■ When you select the Set Video, ■ Image shown may differ from your TV. Set Video. Picture Mode Standard ◄ ► ● Backlight ◄ ► ● Contrast ◄ ● Brightness ◄ ► ●...
■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ ► Auto Volume ◄ ► Clear Voice II ◄ ► Balance ◄ ► Previous Close Make appropriate adjustments. Then, select Close. ■ When you select the Set 3D video, Put on 3D glasses.
TO USE A USB OR PC DEVICE PHOTO LIST You can view photo files on USB or PC storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode.
■ When playing photo files Page 1/1 Photo List Drive1 Page 1/1 USB1 External View Page Change Change Device To Music List Change Numbers Mark Mode Exit Select the target folder or drive. Select the desired photos. Photo files are displayed. Change device.
TO USE A USB OR PC DEVICE ■ When selected photo files are displayed Page 1/1 Photo List Mark Mode Drive1 USB1 External Page 1/1 Mark Page Change View Marked Mark All Unmark All Exit Mark Mode Exit When one or more photos are marked, you •...
How to view photo Detailed operations are available on full-sized photo view screen. Page 1/1 Photo List Drive1 USB1 External Page 1/1 View Page Change Change Device To Music List Change Numbers Mark Mode Exit 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄...
TO USE A USB OR PC DEVICE Select the 01_a.jpg 2008/12/10 Slideshow, 1920 x 1080 479 KB � BGM, (Rotate), ◄ ► Option, Hide or Exit. ◄ 2/13 ► Slideshow Hide Exit Option Q.MENU ► ■ ► Slideshow : When no picture is selected, all photos in the cur- rent folder are displayed during slide show.
Using the Photo List function 01_a.jpg 2008/12/10 Choose options. 1920 x 1080 479 KB Set Photo View. Set Video. ◄ ► Set Audio. Set 3D video. Previous Close ◄ 2/13 ► Slideshow Option Hide Exit Q.MENU ► ■ Show the Option menu. Select Set Photo View., Set Video., Set Audio.
TO USE A USB OR PC DEVICE ■ When you select the Set Photo View, Set Photo View. Slide Speed Fast ◄ ► Drive1 ● Repeat ◄ ► ● Random ◄ ► Previous Close Make appropriate adjustments. Then, select Close. ■...
■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ ► Auto Volume ◄ ► Clear Voice II ◄ ► Balance ◄ ► Previous Close Make appropriate adjustments. Then, select Close. ■ When you select the Set 3D video, Put on 3D glasses.
TO USE A USB OR PC DEVICE MUSIC LIST You can play music files on USB or PC storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV.
Music Selection Page 1/1 Music List Drive1 USB1 External Page 1/1 001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00 00:00 00:00 00:00 005. - B05.mp3 00:00 Play Page Change Exit Change Device To Movie List Change Numbers Mark Mode ■...
TO USE A USB OR PC DEVICE ■ When selected music files are played Page 1/1 Music List Mark Mode USB1 External Drive1 Page 1/1 001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00 00:00 00:00 00:00 005. - B05.mp3 00:00 Mark Page Change...
Using the Music List function, play Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 USB1 External Choose options. Set Audio Play. ► Set Audio. 004. - B04.mp3 005. - B05.mp3 006. - B06.mp3 007. - B07.mp3 008. - B08.mp3 00:00 00:00 00:00...
TO USE A USB OR PC DEVICE ■ When you select the Set Audio Play, Set Audio Play. Repeat ◄ ► Random ◄ ► Previous Close Make appropriate adjustments. Then, select Close. ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄...
■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
TO USE A USB OR PC DEVICE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) You must register your device to MY MEDIA...
DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
GAME/SCHEDULE GAME/SCHEDULE World Time This function operates only if the current time has been set. Simple Manual Pointer Exit Home Menu Today Today Today Today Today Today Quick Menu GUIDE NETCAST MY MEDIA QUICK MENU INPUT Programme List GAME/SCHEDULE Netcast Screen Remote GAME/SCHEDULE World Clock...
Schedule This function operates only if the current time has been set. Simple Manual Pointer Exit Home Menu Today Today Today Today Today Today Quick Menu GUIDE INPUT NETCAST MY MEDIA QUICK MENU Programme List GAME/SCHEDULE Netcast Screen Remote GAME/SCHEDULE Schedule Navigation Add/Edit...
GAME/SCHEDULE Schedule Registration Add Schedule Schedule Navigation Add/Edit Person Sun 4 July Lunar 23. 5 Grandfather Grandmother Father Custom Mother Daughter Event Father Birthday July 4 Repeat Solar/Lunar Notice D-day Birthday Anniversary Lunar 23 May Solar The day Add a Custom repeat D-Day...
Game Allows you to enjoy the games installed on the TV. Simple Manual Pointer Exit Home Menu Today Today Today Today Today Today Quick Menu GUIDE NETCAST MY MEDIA QUICK MENU INPUT Programme List GAME/SCHEDULE Netcast Screen Remote GAME/SCHEDULE Kiev Schedule JUMP HOLE IN ONE WHACK A MOLE...
EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG(ELECTRONIC PROGRAMME GUIDE) Simple Manual Pointer Exit Home Menu Quick Menu Today Today Today Today Today Today Programme List NETCAST MY MEDIA GAME/SCHEDULE QUICK MENU INPUT GUIDE Netcast Screen Remote Programme Guide ▲ That ’70s show 25 Nov. 2008 10:05 DTV 1 YLE TV1 25 Nov.
EPG (ELECTRONIC PROGRAMME GUIDE) EXTENDED DESCRIPTION DTV 1 YLE TV1 25 25 Nov. 2008 10:05 Fia World Touring Car Chanpionship Tue. 25 Nov. 2008 10:05 12:40 Fia Champion Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp;...
MANUAL TIMER Sets a start or end time, programme for recording, and sets a start time, programme for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable.
EPG (ELECTRONIC PROGRAMME GUIDE) SCHEDULE LIST If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Currently recording item cannot be edited or deleted. Schedule List Page1/1 Fri.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
PICTURE CONTROL • 4:3 • Zoom The following selection will allow you to view a picture The following selection will allow you to view with an original 4:3 aspect ratio. the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.
PICTURE CONTROL ꕊ ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.
PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games. PICTURE PICTURE Move...
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.
• Benefits of using Backlight - The electricity consumption is reduced by up to 60 %. - The black brightness is reduced. (As the black has greater depth, you can enjoy a better quality definition.) - You can adjust brightness with maintaining original signal resolution. NOTE ►You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”...
EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. PICTURE PICTURE Move...
PICTURE CONTROL *This feature is not available for all models. ■ Adjusts the contrast to keep it at the best level according to the brightness of Dynamic Contrast the screen. The picture is improved by making bright parts brighter and dark (Off/Low/Medium/High) parts darker.
Standard : Mode to use original colour area regardless of the display char- Colour Gamut • acteristics. (Advanced Control) (Wide/Standard) Wide: Mode to use maximum colour area of the TV display. • Standard : Mode to use original colour area regardless of the display char- •...
TRUMOTION It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. High : Provide smoother picture movement. Low : Provide smooth picture movement. Use this setting for standard use. Off : Turn off TruMotion Operation.
PICTURE CONTROL LED LOCAL DIMMING (Except for 47/55LEX8 * ) After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve the contrast ratio. PICTURE PICTURE Move Move • Colour • Colour •...
POWER INDICATOR Adjust the power/standby indicator light on the front of the TV. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on. If you select 3D mode, Power Indicator is turned off automatically.
PICTURE CONTROL MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores. ■ Image shown may differ from your TV. OPTION OPTION Move...
DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the programme is changed. This feature allows users to enjoy stable volume levels by mak- ing automatic adjustments for each programme.
CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO AUDIO Move Move Auto Volume : Off ● Auto Volume : Off ● ● Clear Voice II ◄ ► Clear Voice II Clear Voice II : Off : Off...
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro- priate sound options based on the programme content.
INFINITE SOUND Select this option to sound realistic. Infinite Sound : Infinite Sound is a patented Select AUDIO. LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers. Select Infinite Sound. Select On or Off.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off ● ● Clear Voice II : Off Clear Voice II : Off ●...
TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers. AUDIO AUDIO Move...
SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want. AUDIO AUDIO Move Move Sound Mode : Standard Sound Mode : Standard ●...
SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Move Sound Mode : Standard Sound Mode : Standard ● ● • Infinite Sound : Off • Infinite Sound : Off •...
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
SOUND & LANGUAGE CONTROL I/II STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. Select Quick Menu. Select Audio or Audio Language. Select the sound output. Broadcast On Screen Display Mono...
NICAM RECEPTION (IN ANALOGUE MODE ONLY) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select NICAM MONO or FM MONO.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. S elect your desired language. S elect your country. (Except for 47/55LX99 47/55LEX89) * If you want to change Language/ Country selection Select OPTION.
LANGUAGE SELECTION The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
SOUND & LANGUAGE CONTROL Audio Language OSD Information < Audio Language Selection > Display Status Not Available ► When two or more audio languages are broadcast, you can MPEG Audio select the audio language. Dolby Digital Audio Audio for “Visual Impaired” Audio for “Hearing Impaired”...
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
TIME SETTING AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Select Quick Menu. Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’, ‘0’, ‘0’, ‘0’. If a channel is locked, enter the password to unlock it temporarily.
BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme. Programme Edit Favourite Group : Page 1/1...
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off.
EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ”On” ■ Image shown may differ from your TV. LOCK LOCK ● ◄ ► Move Move ● Set Password Set Password ●...
PARENTAL CONTROL / RATINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. LOCK LOCK Move...
TELETEXT ■ Image shown may differ from your TV. This feature is not available in all countries. When this function is in operation, Screen Remote Menu’s number, OK button does not work. When this function is in operation, magic motion remote control is not supported here.
TELETEXT TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block.
SPECIAL TELETEXT FUNCTIONS ■ Press the T. OPT button and then use button to select the Text Option menu. ■ In UK(In digital mode), T. OPT button does not work. Text Option ■ Index Index Time Select the each index page. Hold Reveal ■...
DIGITAL TELETEXT *This function works in UK, Ireland only. When this function is in operation, Screen Remote Menu’s number, OK button does not work. When this function is in operation, magic motion remote control is not supported here. Use a common remote control.
APPENDIX TROUBLESHOOTING The TV does not operate properly. ■ Check to see if there is any object between the TV and the remote con- trol causing an obstruction. Ensure you are pointing the remote control The remote control directly at the TV. does not work ■...
APPENDIX The audio function does not work. ■ Press the + or - button. Picture OK & No ■ Sound muted? Press MUTE button. sound ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one ■...
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke- warm water and a little fabric softener or dish washing detergent.
APPENDIX PRODUCT SPECIFICATIONS 47LEX8 * MODELS 47LEX8-ZA / 47LEX8N-ZA 47LEX89-ZA Dimensions with stand 1068.9 mm x 721.5 mm x 306.8 mm (Width x Height x Depth) without stand 1068.9 mm x 627.4 mm x 19.8 mm with stand 20.6 kg Weight without stand 11.9 kg...
APPENDIX 47LX9 *** MODELS 47LX9500-ZA / 47LX950N-ZA 47LX9900-ZA Dimensions with stand 1085.9 mm x 710.6 mm x 255.0 mm (Width x Height x Depth) without stand 1085.9 mm x 654.2 mm x 31.6 mm with stand 26.7 kg Weight without stand 22.1 kg...
55LX9 *** MODELS 55LX9500-ZA / 55LX950N-ZA 55LX9900-ZA Dimensions with stand 1255.8 mm x 805.0 mm x 255.0 mm (Width x Height x Depth) without stand 1255.8 mm x 749.6 mm x 31.6 mm with stand 32.7 kg Weight without stand 28.1 kg Power requirement AC 100-240 V~ 50 / 60 Hz...
APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Function Note Energy Saving R/C BUTTON POWER R/C BUTTON(POWER ON/OFF) INPUT R/C BUTTON R/C BUTTON TV/RAD R/C BUTTON Q.MENU R/C BUTTON MENU R/C BUTTON GUIDE R/C BUTTON R/C BUTTON Up ( R/C BUTTON...
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup ■ Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally.
APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► ■ Image shown may differ from your TV. OPTION OPTION Move Move Language(Language) Language(Language) ● ● Country : UK Country : UK ●...
Communication Parameters ■ Baud rate : 9600 bps ( UART ) ■ Use a crossed (reverse) cable. ■ Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List...
APPENDIX 01. Power (Command: k a) 04. Volume Mute (Command: k e) ► To control Power On/Off of the set. ► To control volume mute on/off. You can also adjust mute using the MUTE button on Transmission remote control. [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On...
09. Tint (Command: k j) 13. Treble (Command: k r) ► To adjust the screen tint. ► To adjust treble. You can also adjust tint in the PICTURE menu. You can also adjust treble in the AUDIO menu. Transmission Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
APPENDIX 17. Energy Saving (Command: j q) 19. Tune Command (Command: m a) ► To reduce the power consumption of the TV. You can ► Select channel to following physical number. also adjust Energy Saving in PICTURE menu. Transmission Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data00 : High channel data...
21. Key(Command: m c) 23. Input select (Command: x b) (Main Picture Input) ► To send IR remote key code. ► To select input source for main picture. Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 172. Data Structure [c][ ][Set ID][ ][OK/NG][Data][x] External Input...
MPL LIBRARIES: Nanox, spidermonkey LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics : email@example.com This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library.
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob- lems or concerns.
MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.
APPENDIX 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL"...
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R.
APPENDIX Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Serial No.