LG 47/55LX9500 Owner's Manual page 56

PREPARATION
STAND INSTRUCTIONS
Image shown may differ from your TV.
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND
2
BODY with the STAND BASE of the
TV.
At this time, tighten the screws that
hold the STAND BODY on.
3
Install the 4 screws into the holes shown.
4 Assemble the part of the STAND
REAR COVER with the TV.
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
20
(For 47/55LX9500, 47/55LEX8)
M4 x 22
M4 x 12
STAND REAR
COVER
STAND BODY
STAND BASE