LG 47/55LX9500 Owner's Manual page 23

AD-hoc Mode
The below settings are only for connecting directly to a PC.
This is the same as connecting two pes with a cross-over cable.
Connecting the Ad-hoc nelw<lrl<
.'.
• *
-."
Cancel
• Example of the PC setting that
supports a wireless network
1.
Find a wireless network device in
your PC
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the
securit~
key that
appears on your TV screen.)
@Next
Insert the IP address.
IP Mode
!IIIIII
• If Address
.ftilij:il_UN
t
Subnet Mask
• Gateway
• ONS Server
....
Features using eKiting network can
be ulllv.iltble, 00
you
want to change network connection?
UN
• PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
2552552550 / default Gateway: 1921680.10
• TV Setting
Verify IP address and gateway of PC
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select
Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255255255.0 / default Gateway: 192.168.0.1
Mac Address: 00:00:13:64:23:01
IP Address : 10.19.152.115
Subnet Mask: 255.255.254.0
Gateway : 10.19. t52.1
@l
Next
Settmg Ad-hoc network
Select the wireless network setting type.
1
Repeat step 1-3 on P.21.
Select Setting AD-hoc network.
Select Enter.
Select Connect to connect Ad-hoc network.
You can see the Network ID and Security Key
on your
TV
screen.
Enter this Network
ID
and Security Key to
your device.
If a network may not operate, change the
setting information using the RED button.
Insert the IP address.
Network setting is completed.
Select Close.
23