LG 47/55LX9500 Owner's Manual page 246

IMPORTANT INFORMATION
Transmission / Receiving Protocol
Communication Parameters
iii
Baud rate: 9600 bps WART)
iii
Data length: 8 bits
Ii!
Parity: None
III
Stop bit: 1 bit
iU
Communication code: AS CII code
tl
Use a crossed (reverse) cable.
..
No connection
RXO (Receive data)
TXD (Transmit data)
DTR <DTE side ready)
GNO
OS R <DC E side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connecti on
Select OPTION.
§
Real data mapping
0
Step 0
Select Set ID.
A Step 10 (Set ID 10)
Choose the desired TV ID number.
The adjustment range of Set Id is 1-
99.
Step 15 (Set ID 15)
Return to the previous menu.
10 Step 16 (Set ID 16)
Return to TV viewing.
63
Step 99 (Set ID 99)
64 Step 100
The RS-232C port allows you connect the RS-232C input jack to an external control
device (such as a computer or an AN control system) to control the Tv's functions exter-
nally.
Note: RS-232C on this unit is intended to be used with third party RS-232C control
hardware and software.
The instructions below are provided to help with programming software or to test func-
tionc:lity using telenet software.
EXTERNAL CONTROL THROUGH RS-232C
EXTERNAL CONTROL TH ROUGH RS-232C in the CD manual is added by
the information presented here.
Type of Connector; D-Sub 9-Pin Male
Set ID
Use this function to specify a TV ID number.
Refer to 'Real Data mapping.
g
BACK PANEL INFORMATION
(#4)
in the CD and book manual is replaced
by the information presented here.
BACI< PANEL INFORMATION
32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500
32/42/46/52/60LD550, 47/55LD650