Playback: Event / Tag - Swann M88200H210313E User Manual

English
The Event Search menu (above) will show you recordings
that were triggered either by an alarm sensor being triggered
or by the DVR detecting motion.
Typically, the majority of recordings based upon "Events"
are likely to be recordings triggered by the DVR's motion
detection feature.
The Smart Search function allows you to select an area of
the video that may have detected motion. The DVR will then
display these areas of motion with a green highlight on the
timeline (see above). This makes it very easy to navigate to the
sections of video that has motion recording related to that
area.
• Use the mouse to move the cursor around the screen.
18

Playback: Event / Tag

The Tag search menu (below) will isolate video events based
on the tag information that video carries. It's similar to Event
playback, but it can be easier to group multiple recordings of
a similar type.
Playback: Smart Search
•
•
•
•
The menu controls allow you to
select full screen detection or to
enable smart search.
Right click in the play area to
access the smart search function.
Click and drag to select the area you want to search for.
You will see a grid of red boxes. The outlined boxes mark
the area that you want to select to search for motion.
By left clicking an area in the grid, you can toggle motion
detection ON or OFF in that location.
Multiple areas of the video can be selected.