JVC KW-NT3HDT Instructions Manual page 90

Troubleshooting/error messages
Symptoms
"Channel Off Air" (XM)
"Loading" (XM)
• "Acquiring Signal" (SIRIUS)
• "No Signal" (XM)
"Check XM Tuner" (XM)
• "No Antenna" (SIRIUS)
• "Check Antenna" (XM)
"Reset 08"
"No Signal"
Bluetooth device does not detect the unit.
The unit does not detect the Bluetooth device.
Echo or noise occurs.
Phone sound quality is poor.
The sound is interrupted or skipped while using
a Bluetooth audio player.
The connected audio player cannot be
controlled.
The unit does not response when you tried to
copy the phone book to the unit.
Remedies/Causes
Selected channel is not broadcasting at this time.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
Signals cannot be received. Move to the place where the
System receives the satellite radio signals.
The XM Mini tuner is not connected. Connect the tuner.
Connect the antenna firmly.
Reconnect this unit and the Satellite radio correctly, and
detach the monitor panel then attach it.
• Turn on the external component if it is not on.
• Connect the external component correctly.
• Check whether <AV Input> setting is correct for "AV-
IN". (☞ page 71)
This unit can be connected with one Bluetooth device at
a time.
While connected to a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
Check the Bluetooth setting of the device.
Adjust the microphone unit position.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to place where you can get a better signal
reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the player
again.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
You may have tried to copy the same entries (as stored)
to the unit.
90