Arctic King WINDOW/WALL TYPE ROOM AIR CONDITIONER User Manual page 15

Fig.4
Fig.5
Fig.6
Fig.7
C. Once the panel has been installed on the side of the
cabinet, make sure it sits securely inside the frame
channel by making slight adjustments. Slide the top
and bottom ends of the frame into the top and bottom
ends of the frame into the top and bottom rails of
the cabinet. Fig.4.
D. Slide the panel all the way in and repeat on the other
side.
NOTE:
2
place the unit into the window opening so the bottom
of the air conditioner frame is against the window
sill (Fig.5). Carefully close the window behind the top
rail of the unit.
frame (Fig.6).
Fig.8
12
If storm window blocks AC, see Fig. 13.
Keep a firm grip on the air conditioner, carefully
3
Extend the side panels out against the window
4
Place the frame lock between the frame
extensions and the window sill as shown
(Fig.7). Drive 3 / 4 (19mm) locking screws
through the frame lock and into the sill
(Fig.8).
NOTE: To prevent window sill from splitting,
,,
drill 1 / 8 (3mm) pilot holes before driving
screws.
Meijer.com
,,