Samsung SCU-2370 User Manual page 43

IMAGE
You can adjust the image settings to your preference.
CONTRAST : Adjust the contrast level to between 0 and 32.
SHARPNESS : Adjust the sharpness level to between 0 and 32.
BRIGHTNESS : Adjust the brightness level to between 0 and 32.
AE MODE
- BYPASS: Do not adjust the contrast and brightness levels,
and output the incoming brightness level as it is.
- MIN/MAX: In normal conditions, correct the minimum and
maximum values of brightness for an incoming source to
optimize the contrast and brightness.
- WEIGHT: If an incoming source shows a great difference
in brightness, this function optimizes the contrast
and brightness to prevent too dark or too bright
image.
SSNR : Reduce the background noise for a low contrast image.
- OFF : Do not activate SSNR.
- LOW : Reduce the noise less but no afterimage remains.
- MID : Normally accepted mode. Reduce the noise as appropriate with less after image.
- HIGH : Excellent noise reduction but the after image remains badly.
DZOOM : Confi gure the digital zoom settings for the camera.
You can set the zoom factor to up to x4. You can move to a sub menu item and change
the zoom factor or zooming area to your preference.
ROTATION : Flip or rotate the image.
RETURN : Save your image settings and return to the main menu screen.
M

If you change the digital zoom factor to focus on a specifi c portion of the screen, the bottom temperature bar will show
the temperature fi gures specifi ed right before the other portion of the screen gets out of the screen.
Next time it restarts, no temperature information will be displayed on the screen but the temperature background color.

The contrast can be adjusted only to below 16 in the option setting of Color 1 or Color 2.
MAIN MENU
SYSTEM
NUC
► IMAGE
COLOR
IMAGE
► CONTRAST
SHARPNESS
BRIGHTNESS
AE MODE
SSNR
DZOOM
ROTATION
RETURN
English - 43
16
16
16
MIN/MAX
MID
OFF
OFF