Samsung SCU-2370 User Manual page 41

Open Camera Menu (SCU-9080)
You can access the camera setup menu .
M

The OSD language of the camera setup menu does not sync with the positioning system.

The communication settings should be confi gured in accordance with the camera specifi cation. Otherwise, the product
may not work properly.

Per communication settings of the camera module
- SCU-VAC: ID=1, baud rate =9600, communication mode= 8-N-1
This instruction applies to SCU-9080. For VAC camera settings, refer to each product's user
manual.
SYSTEM
You can confi gure the preference settings.
TEMP RANGE : Specify the temperature range for the
incoming video signal. You can select
NARROW or WIDE according to the
temperature range.
- AUTO : If you select Auto, the mode will switch between
NARROW and WIDE automatically according to the ambient
temperature.
- NARROW : Activated in a temperature range of between -40
and 150.
- WIDE : Activated in a temperature range of between 0 and
500.
M

The tolerance of the temperature measurement is ±15°C for
NARROW, and ±20°C for WIDE within the distance of 3m from
the object.
TEMP UNIT : Set the temperature unit to °C or °F to your
preference.
TV TYPE : Specify the video output type. Select NTSC or PAL as appropriate to your area.
If the TV Type is changed, the camera will perform MENU RESET to reset itself.
LANGUAGE : Select one from English, Korean, German, Spanish, Italian, Chinese, Russian, Polish,
Japanese, French, Turkish, Czech, Portuguese, Rumanian, Serbian, Taiwanese,
Danish, Swedish, Thai.
MAIN MENU
► SYSTEM
NUC
SYSTEM
► RANGE
UNIT
TV TYPE
LANGUAGE
INFO
RESET
RETURN
English - 41
AUTO
C
NTSC
ENGLISH