Camera Setup (Scu; English - Samsung SCU-2370 User Manual

CAMERA SETUP (SCU-2370)

The camera setting section in this manual is explained based on SCU-2370.
For SCU-9080, refer to page 40. For SCU-VAC products, refer to the own user manual provided separately.
Focus and Zoom Settings
Focus Mode
- AUTO : Performs continuous auto-focus.
- MANUAL : Changes the camera mode to Manual Focus.
- ONE SHOT : Auto-focuses the camera once after the Pan,
Tilt, or Zoom function is used.
Digital Zoom
Enables the maximum digital zoom.
Digital zoom magnifies from x2 to x16, which provides with
zooming up to x592 in maximum when applied with the optical
zoom.
M

Unlike the optical zoom, the graphics quality of the digital zoom decreases
as its zoom ratio increases.

The auto-focus function may not operate normally under the following
conditions :
- When background illumination is low
- While Slow-Shutter is in operation
- If the zoom level is set too high
- When background illumination is too high
- If a long distance object and a close distance object appear together
within a monitoring area
- If there is no contrast, e.g. the sky or a wall
- If the camera is facing a thin horizontal line

Auto Focus focuses on an object in the center of the screen; objects around the
screen edges may not be properly in focus.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Camera Setting
Focus & Zoom
White Balance ATW
Exposure
Back Light OFF
AGC MEDIUM
SSNR MEDIUM
SSDR
Day & Night
Others
Focus & Zoom
Focus Mode ONE SHOT
Zoom Tracking
Digital Zoom OFF

English - 29