Chicago Electric 96289 Set Up And Operating Instructions Manual page 9

3. The smaller the gauge number of the wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Table A.)
4. When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required. (See Table A.)
5. if you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See Table A.)
6. Make sure the extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
7. Protect the extension cords from sharp objects, excessive heat, and damp or wet
areas.
RECOMMENdEd MINIMUM WIRE GAUGE FOR EXTENSION CORdS*
NAMEpLATE
AMpERES
(at full load)
0 – 2.0
2.1 – 3.4
3.5 – 5.0
5.1 – 7.0
7.1 – 12.0
12.1 – 16.0
16.1 – 20.0
TABLE A
Double insulated
Canadian Standards Association
Underwriters Laboratories, inc.
SKU 96289 For technical questions, please call 1-800-444-3353.
EXTENSION CORd LENGTH
25 Feet 50 Feet
18 18
18 18
18 18
18 16
18 14
14 12
12 10
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
Symbology
75 Feet 100 Feet
18
18
16
14
12
10
-
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
(120/240 VOLT)
150 Feet
18 16
16 14
14 12
12 12
10 -
- -
- -
Page 9