Connecting Prp Route Processor Cables - Cisco XR 12410 Installation Manual

Chapter 3 Installing the Cisco XR 12410 Router

Connecting PRP Route Processor Cables

Figure 3-28 PRP Console and Auxiliary Port Connections
1
2
1 Modem
2 Console terminal
3
RJ-45 Ethernet cables
Caution
OL-13832-01
This section describes how to connect cables to the console, auxiliary, and
Ethernet ports on the PRP. The console and auxiliary ports are both asynchronous
serial ports; any devices connected to these ports must be capable of asynchronous
transmission. For example, most modems are asynchronous devices.
Figure 3-28 shows an example of a data terminal and modem connections.
3
4 Auxiliary port
5 Console port
—
The ports labeled Ethernet, 10BASE-T, Token Ring, Console, and AUX are safety
extra-low voltage (SELV) circuits. SELV circuits should only be connected to
other SELV circuits.

Connecting PRP Route Processor Cables

Cisco XR 12410 Router Installation Guide
4
5
3-39