Cisco XR 12410 Installation Manual page 100

Rack-Mounting the Router Chassis
Use the following procedure to install the chassis in the equipment rack:
Using two people, lift the chassis into the rack using the side handles and grasping
Step 1
underneath the power supply bays
An empty chassis weighs approximately 125 pounds (56.7 kg). You need two
Warning
people to slide the chassis into the equipment rack safely.
•
Figure 3-17
Do not grasp the card cage or the air filter door when lifting the router chassis.
Caution
(Figure
Cisco XR 12410 Router Installation Guide
3-24
If you are using the rack-mount brackets, raise the chassis to the level of the
brackets. Let the bottom of the chassis rest on the brackets, but continue to
support the chassis.
Correct Lifting Positions
3-18.)
Chapter 3 Installing the Cisco XR 12410 Router
(Figure 3-17).
OL-13832-01