Cisco XR 12410 Installation Manual page 95

Chapter 3 Installing the Cisco XR 12410 Router
Step 2
Step 3
Step 4
Figure 3-13 Installing the Left and Right Rack-Mount Brackets
OL-13832-01
Install the right rack-mount bracket
Align the bottom screw hole of the bracket with the marked screw hole at the
a.
bottom of the rack and finger tighten a screw in that hole.
Finger-tighten a second screw in the top hole of the bracket.
b.
Use a screwdriver to tighten both screws securely.
c.
Repeat Step 2 for the left rack-mount bracket.
Use a level to verify that the tops of the two brackets are level, or use a measuring
tape to verify that both brackets are the same distance from the top of the rack
rails.
Rack-Mounting the Router Chassis
(Figure 3-13).
Cisco XR 12410 Router Installation Guide
3-19