Prp Auxiliary Port Signals - Cisco XR 12410 Installation Manual

PRP Port Connection Guidelines

PRP Auxiliary Port Signals

Cisco XR 12410 Router Installation Guide
2-24
The PRP auxiliary port is a DTE, RJ-45 interface for connecting a modem or other
DCE device (such as a CSU/DSU or another router) to the PRP. The auxiliary port
supports hardware flow control and modem control.
Table 2-2 lists the signals used on the auxiliary port.
Table 2-2 PRP Auxiliary Port Signals
Auxiliary Port Pin Signal
1 RTS
2 DTR
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS
Chapter 2
Input/Output Description
Output Request to send
Output Data terminal ready
Output Transmit data
— Signal ground
— Signal ground
Input Receive data
Input Data set ready
Input Clear to send
Preparing for Installation
OL-13832-01