How To Use - StarTech.com USB3S2SATA3 User Manual

How to Use

Windows
If you are using a brand new hard drive that does not contain any data, then you will
first need to prepare the hard drive for use. From the main desktop, right-click on
"My Computer" ("Computer" in Vista/7/8), then select Manage. In the new Computer
Management window, select Disk Management from the left window panel.
Locate the Disk that says it is "Unallocated" (check hard drive capacity to confirm it's the
correct hard drive) and then right-click in the section that says "Unallocated" and select
"New Partition".
The New Partition Wizard will appear. Follow the instructions in the wizard to complete
setting up the drive. Once complete, the Disk should show up as "Healthy" with a drive
letter assigned (i.e. E:). This drive letter should now appear within My Computer.
Instruction Manual
5