Output Configuration Command Summary - Racal Instruments 3151 User Manual

3151 And 3151A User Manual
Common Commands Common Commands
*CLS
*ESE
*OPC
*RST
*SRE
*TRG
*ESE?
*ESR?
*IDN?
*OPC?
*SRE?
*STB?
*TST?
Output
Configuration
Command Summary
Commands and Parameters
[SOURce:]
APPLy:SINusoid {<frequency>,[<amplitude>,[<offset>,[<phase>,[<power>]]]]}
APPLy:TRIangle {<frequency>,[<amplitude>,[<offset>,[<phase>,[<power>]]]]}
APPLy:SQUare {<frequency>,[<amplitude>,[<offset>,[<duty_cycle>]]]}
APPLy:PULSe {<frequency>,[<amplitude>,[<offset>,[<delay>,[<high_time>
APPLy:RAMP {<frequency>,[<amplitude>,[<offset>,[<delay>,[<rise_time>
APPLy:SINC {<frequency>,[<amplitude>,[<offset>,[<number_cycles>]]]}
APPLy:EXPonential {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
APPLy:GAUSsian {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
APPLy:DC {<percent_amplitude>}
APPLy:USER {<segment_number>,[<sampling_clock>,[<amplitude>, [<offset>]]]}
APPLy:<function_shape>?
APPLy?
FUNCTion:MODE {FIXed | USER | SEQuence}
FUNCTion:MODE?
FUNCtion:SHAPe {SINusoid | TRIangle | SQUare | PULSe | RAMP | SINC
FUNCtion:SHAPe?
FREQuency {<frequency> | MINimum | MAXimum}
FREQuency?
FREQuency:RASTer {<frequency> | MINimum | MAXimum} (100E-3,100E6,1E6)
FREQuency:RASTer?
FREQuency:RASter:SOURce {EXT | INT | ECLtrg0}
Parameter Form (Default in Bold) ) Parameter Form (Default in Bold
(0;0;255)
(0;0;255)
Output Configuration commands control the output function, shape,
frequency, amplitude, filter and state. Optional modes are omitted
from these commands. Factory defaults after *RST are shown in bold
typeface. Parameter low and high limits are given where applicable.
Use the Standard Waveform parameters as described in Using The
APPLy Command.
,[<rise_time>,[<fall_time>]]]]]]}
,[<fall_time>]]]]]}
EXPonential | GAUSsian | DC }
(Low Limit,High Limit,Default)
SCPI Command Reference 4-9
IEEE-STD-488.2 IEEE-STD-488.2
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
(FIX)
(SIN)
(100E-6,50E6,1E6)
(INT)