Installation - Racal Instruments 3151 User Manual

3151 And 3151A User Manual

Installation

The instrument can be installed in any slot except slot 0 in a VXIbus
mainframe. When inserting the instrument into the mainframe, it
should be gently rocked back and forth to seat the connectors into
the backplane receptacle. The ejectors will be at right angles to the
front panel when the instrument is properly seated into the
backplane. Use two captive screws above and below the ejectors to
secure the instrument into the chassis.
After installation, perform an initial checkout and operational
verification.
Configuring The Instrument 2-6