Rethreading Harness System - Cosco Apt 40RF Instructions Manual

Do not use child restraint without the pad.
Replace child restraint pad by reversing order; Starting from
bottom of child restraint, slip pad on plastic shell; pull harness
tightening strap and each harness strap through pad. Wrap
pad around the top of shell. Pull pad around each cup holder
and slip pad over the sides of the restraints.
Rethread harness (see section C-6).
23
C-6 Rethreading Harness System
1. Install Buckle
Fit the buckle's metal
retainer through the slot
in the child restraint. Red
button must face out.
Pull buckle's metal retainer
completely through pad
and shell from bottom
of seat.
2. Check Buckle
Pull up on buckle to make
sure it is secured. The
buckle must not pull
out.
Thread Harness's
3.
Metal Retainer Into
Shell
Push the harness's metal
retaining into the lower
harness slot making
sure it goes completely
through the pad and shell.
4. Lock Harness's Metal
Retainer
Rotate the shell over to
expose the bottom of shell.
Pull on the harness straps
to lock the metal retainer
into place.
24
Meijer.com
continued on next page.