Preparing To Install Rear-Facing; Preparing To Install Latch; Rear-Facing - Cosco Apt 40RF Instructions Manual

E-1 Preparing to Install Rear-Facing
5-40 lbs (2.3-18 kg) and 19-40 in. (48-101.6 cm)
Rear-Facing using 5-point harness
LATCH Belt
Lap Belt
Never place a child rear-facing in a
seating position with an active frontal
airbag. This can result in serious injury
or death.
This child restraint must always face the rear of
the vehicle and be in the fully reclined position
when the child is less than one year old.
31
Lap/Shoulder Belt
E-2 Preparing to Install LATCH

Rear-Facing

Unhook LATCH from
1.
Side of Shell
Remove the LATCH from
the forward-facing belt
path.
2. Routing LATCH Belt
Insert the LATCH hook
with adjuster through the
rear-facing belt path.
Adjuster
3. Pull Connector Across
to Opposite Side
Reach under pad and
pull the LATCH connector
2
across the plastic shell.
1
LATCH belt MUST be
under pad and in front of
buckle strap.
NOTE: You MUST use the
1st or 2nd buckle strap
slots when rear-facing.
4. Finished LATCH
Routing
Make sure the LATCH belt
is not twisted.
32
Meijer.com