Erasing A Photo Right After Recording It; Basic Playback; Viewing Photos - Canon FS20 Quick Manual

Photos
Erasing a Photo Right After Recording It
Basic Playback
You can erase the photo recorded last
while reviewing it within the time set for
the [REVIEW] option or immediately
after recording it, if [REVIEW] is set to
[(i)
OFF].
.,
1
[gJ1
(QJ
25)
Viewing Photos
It
I ~J
(QJ
25)
+
~~~
~'U
~
While reviewing the photo immediately
after recording:
1
Push the joystick (A) to display
the joystick guide.
2
Press
@.
3
Select (~~) [YES] and press @.
62
When the camera mode dial is set
to
liJ
or ."':
1
Press
."~[B.
• Even if the camcorder is off,
pressing
."~[B
will turn on the
camcorder in playback mode.
• The original movies index screen
appears after a few seconds.
2
Move
(A~)
the orange selection
frame to the tabs on the top of the
screen.
3
Select
(~~
) the tab that contains
the photos you want to play back.
• (lH)/tmJ/1ml You can
switch between the photos
recorded in the built-in memory
and those recorded on the
memory card. Refer to Selecting
What Recordings to Play Back
(CD 40).