Erasing A Photo Right After Recording It; Basic Playback; Viewing Photos - Canon DVD CAMCORDER DC410 Instruction Manual

Erasing a Photo Right After Recording It

You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option (or immediately
after recording it, if [REVIEW] is set to
[ OFF]).
While reviewing the still image
immediately after recording:
1
Push the joystick (
2
Select ( ) [ERASE] and press
.
( 21)
) toward .

Basic Playback

Basic Playback

Viewing Photos

1
Move the /
images).
2
Turn the
turn it toward MODE and release it
to set the camcorder in PLAY
mode.
The green PLAY indicator will turn on.
3
Push the joystick (
between still images.
Push the joystick (
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large number
of still images, you can jump 10 or 100
images at a time.
( 21)
switch to (still
switch to ON, then
) to move
) and hold it
• 53
Photos