Selecting The Print Settings - Canon FS20 Quick Manual

Photos
• If the photo index screen is
displayed, move the zoom lever
toward T to display a photo.
· =
appears and changes to
'I.
• The
~
"'" (print/share) button lights
up and the current print settings
will be displayed for approx.
6 seconds.
o
IMPORTANT
• If
=
continues to flash (for more than 1
minute) or if
'I
does not appear, the
camcorder is not correctly connected to
the printer. In such case, disconnect the
USB cable and turn off the camcorder
and the printer. After a short while, turn
them on again, set the camcorder to
[jj] mode and restore the connection.
• During the following operations, even if
you connect a printer to the camcorder
it will not be recognized.
- Erasing all photos
- Erasing all transfer orders
- Erasing all print orders
CD
NOTES
• &4!l
will appear for photos that cannot be
printed.
• We recommend powering the
camcorder using the compact power
adapter.
• Refer also to the printer's instruction
manual.
• If you have no intention to use the
optional DW-100 DVD Burner, you can
set [USB SETIING] to
[~PC/PRINTER]
(CD 90) so the device type selection
screen does not appear every time you
connect the camcorder to a printer.
• Connection to a PictBridge-compatible
printer will not work when the memory
card contains 1,800 photos or more.
70
• For best performance, we recommend
keeping the number of photos on the
memory card under 100.
• Disconnect the USB cable before
changing the operating mode.
Printing with the
~"tV
(Print/Share)
Button
You can print a photo without changing
the settings simply by pressing
[~~J.
1
Select (....
~)
the photo you wish to
print.
2
Press L~J.
• Printing starts. The
~"'"
button
flashes and stays on when the
printing is completed.
• To continue printing, select (....
~)
another photo.
Selecting the Print Settings
You can select the number of copies
and other settings for printing. The
setting options vary depending on your
printer model.