Erasing A Photo Right After Recording It; Basic Playback; Viewing Photos - Canon FS20 Instruction Manual

Photos

Erasing a Photo Right After Recording It

You can erase the photo recorded last
while reviewing it within the time set for
the [REVIEW] option or immediately
after recording it, if [REVIEW] is set to
[ OFF].
While reviewing the photo immediately
after recording:
1
Push the joystick (
the joystick guide.
2
Press .
3
Select ( ) [YES] and press
62
( 25)
) to display
.

Basic Playback

Viewing Photos

When the camera mode dial is set
to or :
1
Press .
• Even if the camcorder is off,
pressing
camcorder in playback mode.
• The original movies index screen
appears after a few seconds.
2
Move ( ) the orange selection
frame to the tabs on the top of the
screen.
3
Select ( ) the tab that contains
the photos you want to play back.
• / /
switch between the photos
recorded in the built-in memory
and those recorded on the
memory card. Refer to Selecting
What Recordings to Play Back
( 40).
( 25)
will turn on the
You can