Maintenance/Others - Canon FS20 Quick Manual

!\dditional information
Disposal
When you delete movies or initialize the
built-in memory (1iHl /
tml
/Im)
only) or memory card, only the file
allocation table is altered and stored
data is not physically erased. Take the
necessary precautions when you
dispose of the camcorder or memory
card, for example by physically
damaging it to prevent the leakage of
private data.
liHl/tml/1m)
If giving the
camcorder to another person, initialize
the built-in memory using the
[COMPL.INIT.] setting (OJ 32), fill it up
with unimportant recordings, and then
initialize it again using the same
method. This makes recovering the
original recordings very difficult.
Maintenance/Others
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloths or volatile
solvents such as paint thinner.
Lens
If the lens surface is dirty, the autofocus
may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to gently wipe the lens. Never use
tissue paper.
LCD SCreen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form
on its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
108 - - - - - - - - - - - - - - - - - - - - - - - - - - -