Erasing A Photo Right After Recording It; Basic Playback; Viewing Photos - Canon FS10 Instruction Manual

Photos

Erasing a Photo Right After Recording It

You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option or immediately
after recording it, if [REVIEW] is set to
[ OFF].
While reviewing the image immediately
after recording:
1
Push the joystick (
2
Select ( ) [ERASE] and press
.
56
( 24)
) toward .

Basic Playback

Viewing Photos

1
Set the mode dial to
2
Turn on the camcorder.
3
Push the joystick (
between images.
Push the joystick (
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large
number of still images, you can jump 10
or 100 still images at a time.
1
Press to display the joystick
guide.
( 24)
.
) to move
) and hold it