Important Installation Highlights (Installer Please Read) - Honeywell ADEMCO VISTA-10P Installation And Setup Manual

Installation and Setup Guide

Important Installation Highlights (Installer Please Read)

• This system uses addressable keypads and Relay Modules (see table of addresses in Programming
Overview section).
• Keypads must be set for addresses 16-23 (first keypad is address 16, which is different from previous
controls) and programmed in data fields *190-*196.
• 4204 Relay Modules must be set for specific address 12 (see Connecting Relay Modules section).
• Relays have two programming menu modes: Use *79 Menu mode to map module addresses and device
(output) numbers. Use *80 Menu mode to define the output functions (see Output Device Programming
section).
• This system supports programmable function keys. Use *57 Menu mode to define the function keys (see
Function Key Programming section).
• This system provides various paging features. Refer to the Programming Overview section for a
summary on pager programming.
1-2