Features And Installation Highlights; Capabilities; Functions; Compatible Devices - Honeywell ADEMCO VISTA-10P Installation And Setup Manual

Features and Installation Highlights

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
SIA Installations: The VISTA-10PSIA is a certified SIA-compliant control that meets SIA specifications for
False Alarm Reduction. The VISTA-10P is not certified as SIA compliant, but can be programmed for False
Alarm Reduction. To program for False Alarm Reduction, follow the SIA Guidelines noted in the applicable
programming fields.

Capabilities

• Up to 22 zones plus eight keyfob zones (zones 49-56) for total of 30 zones:
-- Six basic hardwired zones (zone 1-6)
-- Supports up to 16 wireless transmitter zones (5800 series; zones 9-24)
-- Supports one configurable zone type
• Up to 16 security codes, each with separate authority levels
• Downloading via Phone Line or Internet: By phone line via an IBM compatible computer, Compass
downloading software, and a compatible HAYES or CIA modem specified by Honeywell. By Internet via an
appropriate communications device (ex. 7845i-GSM) and Compass downloading software. This allows site
maintenance independent of central station monitoring, and modification to sites globally via the Internet.

Functions

• Single-button arming feature: Can use dedicated keys to arm the system AWAY or STAY
• Up to two schedules (1 installer, 1 end-user), to control devices and/or auto-arm/disarm the system
• One keypad macro, which can simplify a long command string (e.g., bypassing zones before arming)
• Paging feature allows certain system conditions to be reported to one pager phone number; can use a
dedicated key on keypads to send a signal to the pager
• Event Logging records up to 32 selected events in a history log; control and readout from the log is done via
Ademco Compass Downloader software or installer/master code at Keypad
• Zone descriptors for all zones (useful only when using Alpha keypads and/or the 4286 Phone Module).
• Optional bell supervision detects external sounder wiring short (when in alarm) or open (when bell is off);
causes a trouble condition, keypad display, and sends a report to the central monitoring station, if enabled.
• Optional RF jam detection for wireless systems detects a condition that may impede proper RF reception
(i.e., jamming or other RF interference); causes keypad display, and sends a report to the central
monitoring station (if trouble reporting is enabled).

Compatible Devices

• Up to eight Addressable Keypads: 6150 Fixed-Word Keypad, 6160 Alpha Keypad, 6150V Fixed-Word
Display Voice Keypad, 6160V Alpha Display Voice Keypad, 6150RF Keypad/Transceiver
• Supports 5881 series receiver and 5800 series transmitters
• Up to four output relays (4204) plus two on-board triggers (does not support Powerline Carrier Devices) --
Up to 12 output functions.
• Ademco 4286 Phone Module; provides access to the system via on premises or off-premises phones for
arming, disarming, etc., plus control of relay outputs.
• Audio Alarm Verification (using AAV module, such as ADEMCO UVS); can be used in conjunction with an
output trigger to permit voice dialog between an operator at the central station and a person at the premises.
• Alarm output provides a 12VDC, 2 AMP output that can drive the compatible sounders; steady output for
burglary/panic, or temporal pulse (3 pulses – pause – 3 pulses – pause – 3 pulses. . .) for fire. Uses current
limiting circuitry for protection.
• Auxiliary Power Output: 12VDC, 600 mA maximum (uses circuit protection).
• Backup Battery: Rechargeable (sealed lead-acid type) 12VDC, 4AH minimum.
•
Communication Device (
connection to various communication devices. Check compatibility and availability of specific models.
• AC Power Supply: Plug-in 120VAC transformer, ADEMCO 1321 (1321CN in Canada)
NOTE: All devices and accessories used in a Canadian installation must be Listed for use in Canada.
Long Range Radio): Primary telephone number messages can be reported via ECP
S E C T I O N
1-1
1